色婷婷综合成人av,免费看日本一区二区,日韩欧美电影在线观看

Rumors: Foxeer HDZero Digisight VTX

montis — Fri, 22 Apr 2022 18:03:25 +0000

Foxeer has posted a teaser photo with Foxeer branded HDZero VTX.

Foxeer Digisight VTX is almost identically the same as?HDZero Race VTX. Probably the technical specs will be the same. Maximum RF power output 200mW.

Lets hope the introduction of the Foxeer Digisight VTX will improve the availability of the HDZero system, which is currently mostly out of stock.

HDZero Whoop Lite VTX

montis — Fri, 08 Apr 2022 11:16:36 +0000

HDZero digital FPV family just got new member – HDZero Whoop Lite VTX. It is lighter and smaller HDZero whoop board, capable to work on?1S battery (1S-3S) and targeted for small tiny whoops.

HDZero Whoop Lite VTX now has SmartAudio support (the older Whoop VTX had no SmartAudio capability). It is outputting 25mW and 200mW of RF power.?The board size is 29x29mm with 25.5×25.5mm M2 mounting holes. The weight of the board is 4.5 grams without RF shielding and antenna.

HDZero Nano Lite Camera

Info from the Carl Zhou:

“HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.

Since this camera uses the same sensor as the Micro v2, it has switchable 4:3 / 16:9 modes, customizable image settings, and excellent low light performance. In 4:3 mode, there is 84deg vFOV vs 69deg vFOV in Nano HDZero.

Please note that the Nano HDZero camera will continue to be sold. This is because the lens options for the Nano HDZero are more flexible for user’s needs. Also, for 16:9 aspect ratio, the Nano HDZero offers more FOV than Nano Lite.”

There will be a digital HDZero FPV kit available for under $100:

$99.99 Bundle: Nano Lite camera + Whoop Lite VTX + 40mm MIPI cable + Antenna

$49.99 Nano Lite camera

$54.99 Whoop Lite VTX

$5.99 40mm MIPI cable

$4.99 Antenna

Available @ (mostly not in store yet or out of stock)

https://www.hd-zero.com/products

https://www.getfpv.com/?q=HDZero

Skystars KM55A – the first ESC with AM32

montis — Fri, 31 Dec 2021 16:42:58 +0000

Skystars ~~is preparing to release~~ has released the KM55A 4in1 ESC, the first off the shelf 4in1 ESC with AlkaMotors32 (AM32) firmware. The KM55A 4in1 ESC is not new in the market, it was released back in the year 2020, but this new version was optimized for the AM32 firmware. AM32 (AlkaMotors32) firmware is OpenSource firmware for STM32 powered ESCs.?AM32 firmware is?upgradable via Betaflight passthrough, just like the BLHeli_S and BLHeli_32 firmwares. AM32 can be configured and firmware upgraded with the ESC-Configurator tool. This tool is accessible online:?https://esc-configurator.com/ Read more about AlkaMotors ESC firmware here:?AM32 (AlkaMotors) firmware for ESC

Release date: 2022-07 Available @ Aliexpress: https://www.aliexpress.com/item/1005004330551733.html Specifications: Input?voltage: 3-6S LiPo Continuous Current: 55A Peak?Current: 70A≥ 10S Firmware: AM32 (AlkaMotors) Support: Dshot 600/1200 Mounting hole: 20X20 mm/M3 BEC: No Product size: 35*47*6.5mm Weight: 16.5g

Rumors: DJI Action 2 camera

montis — Fri, 24 Sep 2021 11:37:14 +0000

New DJI Action 2 camera specifications were leaked out. DJI is preparing to release new Osmo Action 2 camera with improved specs and different form factor.

DJI Action 2 camera will have new 1/1.7 sensor, 155 degree FOV, better low-light performance, RockSteady Digital Video Stabilization V2.0, bigger battery life plus external battery module, improved/upscaled built-in audio quality. Camera supports resolutions up to 4K / 60fps with the aspect ratio of 4:3.

Camera dimensions 39x39x22.3mm and weight is 56 grams.

DJI Action 2 camera will have attachable LCD display with extended battery. Extended battery allows to record up to 195min.

Possible photo of the new camera.

DJI Action 2 specifications:

Source: Twitter

You want more? Ok … this is from the #DJI #Action2 manual. Including the #specs list. Field of view is now 155 degrees in stead of 145. Comes with a necklace too. #thebigleak @DroneXL1 @geeksvana @dronedj @techdronemedia @DronewatchNL @DronefriendlyB @dronemodelismo @OsitaLV pic.twitter.com/SxSRm4VMhx

— Jasper Ellens – 27 Leaks (@JasperEllens) September 23, 2021

SPRacing H7RF FC with ExpressLRS

montis — Mon, 14 Jun 2021 00:12:40 +0000

Dominic Clifton, the creator of the Cleanflight and SPRacing brand, has designed a new top of the line flight controller SPRacing H7RF. Board has H730 MCU, the fastest currently on the market, running on 520MHz operating frequency. H7RF has TDK ICM42688P gyro and ExpressLRS 2.4 GHz Long Range receiver on board. This flight controller has graphic PixelOSD overlay on the video feed as well as RealPit switch. There are also 5 UARTS, 2x 4in1 ESC sockets, SD Card slot, Flash chip for firmware and many more. The SPRacing H7RF board can be mounted in 30x30mm and 20x20mm stacks.

Will be available @

SPRacing: https://shop.seriouslypro.com/flight-controllers

SPRacing H7 ERLS FC User manual: http://seriouslypro.com/files/SPRacingH7RF-Manual-latest.pdf

Specifications:
? STM32H730 CPU, 520MHz inc FPU with ECC
? 2.4Ghz RF receiver IC directly connected to the CPU via SPI for lowest stick-to-motors latency possible. Designed for
ExpressLRS RC system
? SPRacing Pixel OSD with customizable layout, profiles and configuration menu system. Double buffered and capable
of 60FPS (NTSC) or 50FPS (PAL)
? Very low-noise ICM42688P accelerometer/gyro (connected via SPI)
? BMP388 High-precision Barometer – bottom mounted for wind isolation (I2C + interrupt)
? 2MByte 16MBit NOR flash via OctoSPI
? MicroSD card slot (SD/SDHC, up to 32GB) connected via 4-Bit SDIO
? High quality 1.4mm thick 6-layer copper gold-plated PCB with snap-off sections
? 2-8S BEC 5V 2A Switching regulator.
? TVS protection diode.
? High-current 3V switching regulator with extra filter capacitors for sensors
? Buzzer circuitry
? RSSI Analog and PWM circuit
? 8 motor outputs with 2 4in1ESC connectors (JST-SH 10pin)
? 4 sets of 2mm pitch break-out through holes for stacking VTXs or other peripherials
? 1x SPI breakout onto stacking connector
? 5 Serial Ports (4x TX+RX + 1x TX only bi-directional for ESC Telemetry)
? 4 LEDs for 5V, 3V and STATUS A/B (Green, Blue, Red, Orange)
? 37x37mm PCB with 30.5mm and 20mm mounting hole patterns
? 27x27mm PCB after break-off PCB sections (left/right/bottom) are removed
? 4mm mounting holes for soft-mount grommets and M3 bolts
? MicroUSB socket for configuration and ESC programming

Package contents
? Supplied with 4x soft-mount grommets
? Optionally supplied with 2x Audio/Video JST-SH cables. (Camera Input, VTX Output)
? Optionally supplied with IO cables. (for GPS, etc)
? Optional receiver cables for FrSky XSR receivers and 3-pin style receivers available
? 2x sets of 4 solder pads for ESC connections (Bi-Directional DSHOT compatible, 8 motors + 2x TLM + 2x Current)
? 2x sets of 4 solder pads for ESC connections under the connectors! (Same signals as connectors and other pads)
? 4x special solder pads with through-holes for Camera In + Camera OSD
? 4x special solder pads with through-holes for Audio+Video Out (VTX)
? 1x 4 pin JST-SH connector for LED Strip and BUZZER.
? 1x 4 pin JST-SH connector for SWD debugging.
? 1x 12 pin JST-SH connector for 3 UARTS + I2C + 5VBEC + 5V for IO connections.
? 1x 10 pin JST-SH connector for Camera/VTX/UART3/GPIO/Camera Control connections.
? 1x 4pin though-holes for pin headers for UART4 RX/TX
? 1x 8pin though-holes for pin headers for UART8 RX/TX
? 1x 4pin though-holes for pin headers for Camera (GND/Power/Video IN/Camera Control).
? 1x 4pin though-holes for pin headers for VTX (GND/Power/Video OUT/VTX Control (TLM) via UART3).
? 1x Side-press BIND button (top mounted).
? 2x 5V/BATTERY voltage selectors for Camera and VTX outputs
? SP Racing logo
? 1x Additional easter eggs!

Source: Facebook, Discord

Rumors: Radiomaster T8 Pro Radio

montis — Sun, 20 Dec 2020 01:38:10 +0000

Radiomaster is preparing to release their variant of the gamepad style radio called T8 Pro.

New Radiomaster T8 Pro has multiprotocol module inside with only the CC2500 chip, so only the Frsky, Futaba and a few other protocols. T8 Pro radio is running on the best and the most popular OpenTX operating system.

The LCD on the T8 Pro is made modular and fully removable. The purpose of this design is unknown. Why would you want to detach the LCD screen is a mystery to me. Maybe you can make settings and adjustments with the LCD module attached and then detach it and connect the other external module? Or maybe it’s made modular to have a few versions of the radio in the market. Hint: Look at the iFlight iF8 radio.

The LCD panel can be bent 180 degrees range and can be folded down for easy transportation.

Unfortunately is it still unknown if the radio has USB connector or SD card slot. Probably they are under the LCD mount bracket.

The rumored price is in the range of the $40-$50 and that would make the Radiomaster T8 Pro one of the cheapest multiprotocol radios.

Sneak peek at the radio:

Source: Facebook, http://jizomae.sakura.ne.jp/wp/?p=7074.

iFlight iF8 OpenTX Frsky D8 radio

montis — Tue, 15 Dec 2020 23:32:33 +0000

iFlight has also released the game pad type radio iF8. It is 2.4G 8 channels radio running OpenTX and is compatible with Frsky D8 protocol. This radio is clearly intended for beginners and is designed to be easy to use. iFlight iF8 radio does not have any LCD display or control buttons just the gimbals and 2 three way and 2 two way switches for setting modes.

The iF8 radio has power button, neck strap hook and the 5 leds, probably for battery charge state indication.

On the back of the radio you can probably find the bind button and the cover to unknown bay.

On the top side of the iF8 radio you can find the 4 switches (2 two-way and 2 three-way) and the slot for external antenna. External antenna was probably in the plans, but the final version went with internal one.

iFlight iF8 radio dimensions are similar to the BetaFPV LiteRadio 2 and Jumper T-Lite radios.

Release date: TBD

Available @:

Xt-Xinte: http://www.xt-xinte.com/iFlight-IF8-2-4G-8-channels-OpenTX-Frsky-D8-2s-550mAh-IF8-Remote-Control-…-p791788.html

Product: iFlight iF8
Frequency range: 2.4G (2400MHz-2480MHz)
Protocol: Frsky D8
Channels: 8 channels
Transmitting power: 19.3dbm
Remote control distance: >2KM@19.3dbm
Rocker type: potentiometer version
Working current: 160mA@8.4V
Charging voltage: 8V DC
USB charging current: 0.7A
Open source firmware: OpenTX
LED light: green light switch power light/white battery indicator light/white logo light
Battery: 2s 550mAh
Battery life: about 6 hours
Weight: 236g (including battery)
Size: 165mm*70mm*130mm

Caddx Nebula digital FPV camera

montis — Mon, 11 May 2020 14:30:26 +0000

Caddx has announced new Nebula Nano digital FPV camera. It is nano sized 14x14mm camera with the weight of only ~~3.9~~ 4.5 grams (for reference DJI Air camera weights 8.2 grams). Nebula has 1/3” size CMOS sensor, which is slightly bigger than 1/3.2” CMOS It has full aluminum housing and comes in two colors – silver and black. Nebula works with both Caddx Vista and DJI Air digital FPV systems.

Caddx Nebula Nano camera will have only one quality setting 720p/60fps. No “Low latency” or “High Quality” modes. At this mode Caddx Nebula is expected to have about ~~38ms~~ 32ms latency, which is more than DJI Low Latency Mode (720p/120fps): <28 ms, but slightly less than DJI High-Quality Mode (720p/60fps): <40 ms. Camera sensor native 16:9 aspect ratio and you will not be able to switch it to 4:3 mode. Caddx Nebula camera field of view is 150° (most probably in diagonal) in comparison with the DJI FOV: 150°(D); 122°(H); 93°(V).

Release date: unknown.

Available @

Banggood: https://www.banggood.com/Caddx-Nebula-Nano-1-or-3-inch-CMOS-2_1mm-150-720P-60fps-Digital-FPV-Camera-for-DJI-Air-Unit-and-Vista-p-1680146.html

GetFPV: https://www.getfpv.com/caddx-nebula-nano-digital-fpv-camera.html

Specifications:
Sensor: 1/3″ CMOS
Resolution: 720p/60fps
FPV field of view: 150°
Lens: 2.1mm
Latency: 32ms
Dimensions: 14x14x21mm (with 19×19 adapter bracket)
Weight: 4.5g

Source: Facebook, Youtube, Caddx

Caddx ANT Nano FPV camera

montis — Thu, 30 Apr 2020 16:07:47 +0000

Caddx has released the teaser with their new nano sized camera called ANT. This new nano sized camera weights only 2 grams. It is a bit heavier than RunCam Nano 3 camera (1.1 gram), but Caddx ANT has screw holes for easier mounting. Camera also has wide range of the input voltage: from 3.7V up to 4S battery. Caddx ANT has 1.8mm lens with a 165° FOV.

I wish Caddx could make a version without the connectors, just the soldered wires directly to the camera board.

Specifications
Model: Caddx Ant
Image Sensor: 1/3″ CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC or PAL
OSD menu: Support
Image format: 16:9 or 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio: >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm
Min. Illumination: 0.001Lux@F1.2
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm(with bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Work Temperature: -20℃~+60℃
Work Humidity: 20%~80%
Weight: 2g (N.W.)

Packing List
Camera x1
3pin FPV silicone cable x1
Warranty card x1
Expend bracket x1
Screws x 4

Available @

Caddx: https://caddxfpv.com/products/caddx-ant-1200tvl-global-wdr-with-osd-2g-ultra-light-nano-fpv-camera

Source: Facebook

BrotherHobby Hyperbola – sub 250g 5 inch quad

montis — Thu, 30 Apr 2020 00:06:07 +0000

BrotherHobby is about to release 5” sized, sub 250g quadcopter named Hyperbola. The total weight including the 4S 95C 850mAh XT60 battery is only 247 grams. It has specially designed light frame, new BrotherHobby VY2004 3150Kv motors, HGLRC Zeus35 AIO FC with 35A 4in1 ESC, HGLRC MT Mini VTX, Caddx Ratel camera and Gemfan 5125 triblade props.

Total motors thrust is about 4.14 Kg and the thrust to weight ratio is about 16.8! Weight without battery is only 146g.

Hyperbola frame thickness is 3mm, weight is only 22g.

Available @ Nowhere.

Rumored release date: 2020 June.