盗摄牛牛av影视一区二区,国产精品一区二区欧美,亚洲精品亚洲人成人网

By: montis

montis — Wed, 11 Aug 2021 06:21:14 +0000

In reply to felipe. Hi, you most likely have defective flight controller. Arming disable flag NO-GYRO means Gyroscope chip is faulty or FC board is faulty. If you have tried to update the Betaflight firmware then this error can occur if you select the wrong hardware target for flashing.

By: felipe

felipe — Mon, 09 Aug 2021 19:20:17 +0000

hola
no puedo arm mi beta95xv3 conecto el dron al pc y en la opcion de calibrar giroscopoio no aparece pero si la tengo activada y cuando meto status en CLI me aparece
Arming disable flags: NO-GYRO
no tengo idea de como solucionar si alguien puede guiarme yo feliz ya que estoy desesperado

By: montis

montis — Sun, 21 Mar 2021 08:40:02 +0000

In reply to Herbal. Hello, Most likely you have PARALYZE mode activated. Go to the Betaflight modes tab and delete the PARALYZE mode or set it to the free AUX channel with the right range.

By: Herbal

Herbal — Sat, 20 Mar 2021 22:36:16 +0000

Bonjour
J’ai le “paralyse mode actived”
Je ne sais pas comment résoudre ce problème
Marci de votre réponse et aide

By: montis

montis — Sun, 17 Jan 2021 21:14:03 +0000

In reply to KG. Check in the betaflight configurator if your props are set to spin in normal or reversed (props out) mode. Also check the gyro orientation setup by visual quad position inspection on the first page of the betaflight configurator.

By: KG

KG — Sun, 17 Jan 2021 20:57:00 +0000

We have a Tiny Hawk. When we try to arm, it arms for a slit second, spins. and then gives a runaway warning. We made sure the props are spinning in the right direction.

By: montis

montis — Fri, 21 Aug 2020 08:59:34 +0000

In reply to Tee Boi. Thanks for followup. Yes this makes more sense as OSD settings have nothing to do with the ARMing the quadcopter.

By: Tee Boi

Tee Boi — Fri, 21 Aug 2020 04:34:54 +0000

FIX Update: Looks like the initial fix I posted was a fluke. It just worked intermittently when I changed that setting 3 times in a row. But after I posted this, the 4th time wasn’t a charm. However, I now can say with confidence that the new discovery may be the smoking gun. I had a R9 MM-OTA Rx installed ono the Tx2/Rx2 pads, but because I can’t seem to pair it I’ve been using the stock TinyHawk Freestyle 2 SPI Rx. After de-soldering the R9 MM, it works like a champ now…famous last words ??

By: montis

montis — Thu, 20 Aug 2020 13:29:51 +0000

In reply to KC. Interesting info. Thanks for sharing

By: KC

KC — Thu, 20 Aug 2020 04:00:33 +0000

FIX: I was struggling to try to get my TinyHawk Freestyle 2 to ARM and all Flags in BetaFlight were showing no problems (besides MSP which is normal when checking other flags via BF). The one thing that solved my arming issue was in BetaFlight, go to the OSD section and disable (uncheck) the Warnings ‘Arming Disabled’. So excited to fly now, unfortunately, this took 2 hours to figure out and now it’s dark out SMH…