Caddx Vista VTX for?DJI? Digital FPV System
Caddx will be making the Vista digital video transmitter for DJI? Digital FPV System! There was a photo of a new product taken at the Caddx booth at the FAI WDRC event. It is DJI? licensed product and should work with the DJI? Digital FPV Goggles.
Caddx Vista digital VTX is much smaller (30.5x29x13 mm) and lighter (19 grams) then DJI FPV Air Unit transmitter module. Other specifications are the same: 28ms latency, 4Km operating range, 8 simultaneous channels and the USB-C connector. VTX module has 20×20 mm holes for m2 mounting screws. Total weight of the Caddx Vista FPV kit (with camera) is 29g.
Users can select 200mW/500mW/700mW output power modes from the DJI goggles. Caddx Vista VTX module is compatible with DJI remote controller so you can connect the Caddx Vista directly to the flight controller and there is no need for additional remote control receiver.
Caddx representatives told, that this VTX will cost around 75 USD.
MSRP Price: $149.99 (DJI camera included)
Available @
Banggood: https://www.banggood.com/Caddx-Vista-HD-Digital-System-5_8GHz-FPV-…-1625165.html
Caddx: https://caddxfpv.com/products/caddx-vista
Specifications
Name: Caddx Vista Kit
Operating Temperature Range: 32° to 104° F (0℃ ~40℃)
Features:
– 28ms ultra low latency, high definition digital image transmission.
Related Posts
-
BetaFPV SuperG NanoTX – first dual diversity ELRS TX
BetaFPV, in collaboration with the ELRS developer team, has unveiled another first in the -
Radiomaster Pocket Radio
Radiomaster has unveiled its latest creation, the Radiomaster Pocket Radio, a compact but feature-packed
About Author
n33d ??
Wait for it ??
Hi Folks.
I was hoping to mount my vista above my Whoop Size AIO FC board.
Above it states that the 20×20 supports M2 bolts but I’ve tried to screw the bolts in they definitely don’t fit. Anyone else seen this? Do you know what size bolt would fit?
Hello, I bought a flywoo explorer LR dji with R9m, at that time I wasn’t thinking of using dji remote controller. Got some issues with binding to the receiver, so I got the dji fpv remote controller. I was able to bind it to my caddx but it doesn’t respond at all, I tried with Betaflight no signals from the remote controller. SBUS is enabled but yet still no signal. Does Caddx work with external receiver on board and dji controller? Not that I need to do some physical adjustments…
Hi, I don’t have Flywoo Explorer and I’m not the owner of the DJI equipment, so have no experience in it. I would suggest you to try asking for help on RCG (https://www.rcgroups.com/forums/showthread.php?3371977-DJI-Digital-FPV-System-Owners) or Facebook (https://www.facebook.com/groups/DJI.FPV/,https://www.facebook.com/groups/2278814245775844/).
Quick Question:
Will the Cadex work with the DJI white goggles? Or just the new Racing goggles with the four antenna?
Caddx Vista works only with DJI FPV Goggles (The Digital FPV goggles, not the Occusync goggles)
Which DJI remote control works with the Cadxx Vista vtx?
That doesn’t make sense.
Would the DJI controller be for video and then you use a X9D for the transmitter?
What am I missing here?
Caddx Vista works with the DJI Digital FPV controller. No need for the additional transmitter (like X9D). Of course you can also use the DJI Digital FPV video system and other transmitter/receiver combo.