Darwin F411 15A ELRS Bluejay AIO

Darwin ELRS F411 15A?AIO FC is the updated version of Darwin F411 15A AIO. It has integrated ELRS receiver on the FC, connected via SPI bus. ESC now runs Bluejay firmware and is compatible with 1-3S Lipo input. The maximum current is 15A (17A burst). FC provides 2 sets of full UARTS and at the same time provides various external devices connections such as SBUS, Softserial (for SmartAudio), CURRENT, BUZZ, RGB. Board also has USB pads for soldering the USB port extension.

DarwinFPV ELRS F411 15A AIO FC wiring connection diagram:

Available @

Aliexpress:?https://www.aliexpress.com/item/1005003723658098.html

Specifications:
FC MCU: STM32F411CEU6(100MHz)
IMU: ICM-20689 (SPI)
OSD: Beta?ight OSD AT7456E
RF: SX1280 (2.4GHz)
BEC output: 5V/2A & 3.3V/0.2A
Firmware target: betaflight_4.3.0_BETAFPVF4SX1280
2x Uarts(1,2)
1x SBUS (RX1 inverter)
1x Softserial_TX option
1x External USB solder pad
1x CRT(Current)
1x BUZZ
1x RGB
ESC MCU: EFM8BB21F16G
Input Voltage: 1-3S LiPo
Continuous current: 15A
MAX current (5seconds): 17A
ESC Traget: Bluejay_S_H_50_48_v0.14
Size: 37x36x10.8mm
Installing Hole: 25.5×25.5mm(M2)
Weight: 5.0g