FrSky Apus MQ60 V2 – what’s new?

        Frsky has released second version of their tiny whoop – Apus MQ60 V2. What has been changed? This is going to be the most booring news post – FrSky hasn’t upgraded a thing on this new Apus MQ60 V2! Look at the specifications – they are exactly the same as for  APUS MQ60 V1 . Well, actually, they do have changed something – changed the 4-bladed props to 3-bladed and updated the VTX firmware to disabled some of the frequencies to comply the FCC regulations. Last year the FCC has imposed a $180,000 civil penalty on GetFTP (Lumenier Holdco LLC) for selling the non complient video transmitting devices. Some of them were transmitting on the frequencies that fell outside the permissible amateur bands. Most probably FrSky has discontinued the V1 and made a new V2 version just to comply theese regulations.

        Also motors were changed to 19000KV ones. FrSky has changed the motor supplier  (Thanks Joe, for the reminder).

        Here is the VTX frequencies list for APUS MQ60 V1:

        And this is the updated VTX frequencies list for APUS MQ60 V2:

        User Manual for V1: https://www.frsky-rc.com/wp-content/uploads/Downloads/Manual/Apus%20MQ60.pdf

        User Manual for V2: https://www.frsky-rc.com/wp-content/uploads/Downloads/Manual/Apus%20MQ60%20V2.pdf

        Available @ https://www.banggood.com/Frsky-Apus-MQ60-w-Frsky-XMF3E-Flight-Controller-5_8G-25mW-600TVL-Cam-Micro-Racing-Drone-BNF-p-1250703.html

        Specifications for V2 (and V1):

        • Model name: Apus MQ 60 V2
        • Wheelbase: 66.5mm
        • Weight: 20g (Without battery)
        • Size: 84mmx 84mmx58.5mm
        • Flight controller integrated with XM receiver
        • Firmware version: betaflight_3.0.0_frsky(can be upgraded)
        • Motor: 615 coreless
        • Prop Size: 31mm 3 blades props
        • Camera: NTSC 672X492
        • Video Transmitter: 5.8G 26CH 25mW
        • Battery: 3.7V 200mAh 25C Li-Po battery

        Features:

        • Lightweight
        • 5 minutes of flying time
        • Support 2 binding modes (automatic and manual)
        • Solid frame and strong blade protection
        • Fly without having to adjust the parameters after binding
        • Supports parameter adjustment and the default value recovery

        2018-07-02 – Updated changes list.
        2018-09-18 – Motors have been changed!

        Comments
        1. Joe
          • montis
            • Joe
              • montis

        Leave a Reply to Joe Cancel reply

        Your email address will not be published.

        *

        主站蜘蛛池模板: 乳源| 民勤县| 屯门区| 保德县| 郎溪县| 东明县| 武邑县| 错那县| 崇文区| 南华县| 邮箱| 康保县| 明溪县| 利川市| 广汉市| 弥勒县| 安塞县| 梁平县| 禹州市| 湘潭市| 莆田市| 富裕县| 屏东市| 红原县| 武穴市| 阿鲁科尔沁旗| 谷城县| 浙江省| 普兰县| 遂昌县| 白银市| 苍溪县| 翁牛特旗| 乌什县| 通许县| 永川市| 景洪市| 二连浩特市| 孝昌县| 东安县| 花垣县|