GEPRC GEP-20A-F4 AIO toothpick flight controller
GEPRC is the second manufacturer, who has released the 20A capable toothpick flight controller (the first was BetaFPV 20A F4 AIO) . GEP20A-F4-AIO board is rated for 20A continuous current and even 30A on peak (burst)! The MOSFETs on the board are TOSHIBA TPN2R203NC, that are capable of providing max 45A of the current. The board has no connector sockets, just solder pads for motor wires. And that is reasonable decision as the currents are high and the board is intended to be used with bigger motors on 3″- 4″- 5″ inch toothpicks.
GEPRC GEP20A-F4-AIO User Manual can be found here: https://geprc.com/download/en/GEP-20A-F4-Manual-EN-V2_0.pdf
Available @
GEPRC: https://geprc.com/product/gep-20a-f4-aio/
Specifications:
- Model Name: GEP-20A-F4
- MCU: STM32F411
- IMU: MPU6000 gyro/accelerometer (SPI)
- FC Firmware target: MATEKF411
- OSD: BetaFlight OSD w/ AT7456E chip
- Current Monitoring: Support
- Betaflight OSD: Support
- External Buzzer: Support
- LED: Support
- USB Port: MicroUSB
- BEC Output: 5V@1A
- Integrated LC Filter
- ESC MCU: BB21F16G
- Continuous current: 20A
- Peak current: 30A
- Input: 2-4s lipo
- Supports Dshot600 ,Oneshot, Multishot
- Current meter: 210
- Target: G_H_30
- Size: 32x32mm board, 26.5mm mounting holes (M2)
- The overall weight is about 7.3g
Receiver Support:
- Frsky XM/XM+/R-XSR
- Futaba Receiver
- DSM/DSMX
- FlySky Receive
- TBS Crossfire Receiver
- AC900
- Most receivers that support SBUS
Feature:
- Strong performance, cont.current 20A, burst current 30A
- BLhelis_S 20A, maximum support 4S battery, Built-in current sensor
- Compatible with 12xx-15xx motor installation, with 3″-5″ size propeller
- STM32F411 flight control, Super-high Running Frequency
- MPU6000 gyroscope
- Designed with silica gel shock absorbing column, it can reduce the high frequency vibration caused by frame and motor, allowing the flight control to operate in a noiseless environment
Related Posts
-
BetaFPV SuperG NanoTX – first dual diversity ELRS TX
BetaFPV, in collaboration with the ELRS developer team, has unveiled another first in the -
Radiomaster Pocket Radio
Radiomaster has unveiled its latest creation, the Radiomaster Pocket Radio, a compact but feature-packed
About Author
montis
Comments
Manual can be found here: https://geprc.com/download/en/GEP-20A-F4-Manual-EN-V2_0.pdf
Thanks, I’ve updated the article.
What about jumper receiver XYZR1
Jumper R1 receiver is a copy of FrSky XSR receiver. Works reasonably well, but there are better ones in the market.
i bought GEPRC PHANTOM HD FPV 2.5 Drone GEP-20A-F4 AIO FC Caddx Vista. I upload firmware to GEP-20A-F4 AIO. I lost all config and serial ports etc. how can i fix it
Here is the CLI DUMP for GEPRC PHANTOM HD 2.5 inch quad:
https://drive.google.com/file/d/1uCleTFFUW_fhBO3nliQtkovdg8K4gWrh/view?usp=sharing
Try this. And remember to always make a backup of the CLI DUMP before making any changes or updating the firmware.
Can i use 4s hw battery
Yep, should work fine. I would also add LOW ESR capacitor on the battery leads for minimizing the voltage spikes.