Jumper T-Lite multiprotocol radio

        Jumper is preparing to release the game controller style radio Jumper T-Lite. The shape of the radio is very similar to the BetaFPV LiteRadio 2, but with small 1.3 inch monochrome LCD display and navigation buttons. Jumper T-Lite also has internal multiprotocol 4in1 or CC2500 module and the removable antennaT-Lite radio will be running OpenTX firmware and hopefully will have full OpenTX developers support soon.

         

        The Jumper T-Lite Hall effect gimbals looks to be the same as on Jumper T12 radio. 

        T-Lite has possibility to install JR Lite module bay, and can be equipped with TBS Crossfire Nano TX module.

        This radio has trim buttons, which is very handy for fixed wing pilots. There is USB-C type connector for connecting the radio to the PC (OpenTX Companion or simulator use). Also the Li-on battery can be charged internally by USB-C cable. 

        There are two versions of the T-Lite radio: One with 4in1 multiprotocol module that supports all major radio protocols and single CC2500 chip module supporting FrSky and Futaba protocols.

        Version Gimbal Screen Module Chip/ Protcol
        T-LITE

        JP4IN1

        Hall Sensor 1.3 ” LCD screen 4IN1 Module

        A7105-Flysky,Hubsan,AFHDS2A etc

        CC2500-Frsky,Futaba SFHSS,Hitec,Radiolink,Esky,Corona etc

        CYRF6936-DSM / DSMX,Walkera Devo,Wfly etc

        NRF24L01-HISKY,Syma,ASSAN etc

        T-LITE 

        CC2500

        Hall Sensor 1.3 ” LCD screen CC2500-frsky, Futaba SFHSS,Hitec,Radiolink,Esky,Cor

        Photos of the back side. You can see the slot for the cables under the sticker. The radio comes with the adapter and cables for external module.

        Photos of the internals

        OpenTX support for the Jumper T-lite is planned in the 2.3.12 version of the OpenTX (https://www.open-tx.org/radios).

        Update 2021-01-25: Jumper has updated the description of the T-Lite Radio. Now it says that TBS CRSF Nano maximum power output of only 25mW. Higher power levels needs external power supply. Also support for IRC Ghost confirmed.

        Estimated release date: 2021-01-25

        Available @:

        Makerfire (coupon code “MFTLite“): https://shop.makerfire.com/collections/new-arrival/products/jumper-t-lite-…-lcd-screen

        Banggood (coupon code “BGJumper00“): https://www.banggood.com/Jumper-T-Lite-16CH-Hall-Sensor-Gimbals-…-1782091.html

        Features:
        Internal
         Multi-Protocol Module
        Full Size Adjustable Hall Sensor Gimbals
        Single 18650 battery Powered (Battery not included)
        Integrated USB-C Charging function
        Reserve Frsky R9M LITE Module Bay (Support TBS CROSSFIRE NANO)
        Remove-able Antenna
        Voice Broadcast Function
        Vibration Reminder Function
        Reserve TF Slot
        Simulator Interface
        1.3 inch 12864 LCD Screen
        Trimming Buttons 

        Specification:
        Name: Jumper T-Lite
        Versions: 
        Single RF: CC2500
        Muti-Protocol: Built-in 4 in 1 Muti-Protocol Module
        Size:166*106*56mm
        Weight:260g(with18650)
        Voltage:DC3.5-4.2V
        Battery:1×18650( Battery not included )
        Channel:16CH
        External MicroSD Card:reserved SD cards lot

         

        Source: Facebook, Makerfire

        Tags:
        Comments
        1. EscMinator
          • montis
            • Das Sams
          • Joe
            • Ricardo Ricardo
              • montis
        2. tanomogi
        3. Stephane
        4. Kenneth Phang
          • montis

        Leave a Reply to Das Sams Cancel reply

        Your email address will not be published.

        *

        主站蜘蛛池模板: 义马市| 临高县| 宁津县| 洪泽县| 大名县| 临颍县| 易门县| 观塘区| 石棉县| 安龙县| 崇左市| 翼城县| 苏州市| 东宁县| 新营市| 明水县| 延川县| 西贡区| 隆安县| 阜南县| 丰台区| 赤壁市| 太原市| 保山市| 建平县| 丹寨县| 陈巴尔虎旗| 霍州市| 安宁市| 射阳县| 夏津县| 汶川县| 白朗县| 吉木乃县| 富阳市| 巴青县| 兰州市| 黄大仙区| 喀喇| 文化| 金昌市|