3p视频在线观看,成人精品一区二区三区电影免费,国产三级视频在线播放线观看

By: Malwin

Malwin — Mon, 02 Nov 2020 18:01:17 +0000

Hello,
my OSD is not working? All pins are right connected and nothing is coming to VTX an Goggle? Im confused? Anybody a idear?

By: montis

montis — Mon, 11 Feb 2019 19:52:04 +0000

In reply to Scott McClarin.

You are either out of luck or out of money with this AIO FC… ??
What about Airbot Asgard or Asgard32? Although they also have USB in inconvenient position…
I’m also looking for suggestions.

By: Scott McClarin

Scott McClarin — Mon, 11 Feb 2019 16:55:37 +0000

Some Issues with my last 4 AIO boards of this model…1.) The SMD mount Caps pop off EASY…2.) the Gyro starts to drift after about 30 packs…3.) the USB cant be used in a tight build to tune…4.) 2 out of 5 boards stopped working after plugging in to BF, just DEAD. I think I have given this platform more money than my old high maintenance girlfriend…I am over it. Looking for a solid F4 FC with a 4in1 ESC that is known to be solid.

By: Scott McClarin

Scott McClarin — Wed, 05 Sep 2018 01:45:36 +0000

Anyone have a BLHeli_32 Target for this board? I dont think I flashed the correct one.

By: KalleKnall

KalleKnall — Sat, 01 Sep 2018 23:29:13 +0000

I think its possible to use an additional UART directly on the MainChip witch is not routed out.

By: montis

montis — Mon, 13 Aug 2018 10:50:59 +0000

In reply to Scott McClarin. Oh its needed for motor sounds. Now I got it. Never bothered to play with motor sounds. Thanks for your reply.

By: Scott McClarin

Scott McClarin — Fri, 10 Aug 2018 20:29:02 +0000

Because you can use BL_Heli motor beeps and tones, and Music from BLHeli’s Music Editor, the Buzzer pad can be reallocated in BF to function as an additional UART such as Smart Audio. Turtle mode also is confirmed to work with the LuxF4osd target in BF 3.4 I will get back to synchronizing in BL_Heli..its not hard, but honestly they should all come pre synchronized from the factory, I am hoping my board was a rare exception…will find out when I plug the second ALPHA board I have in to BLHeli_32 to check.

By: montis

montis — Mon, 06 Aug 2018 21:36:02 +0000

In reply to montis. BTW: never heared about BLHeli_32 synchronization. What do you mean by that? How is it done?

By: montis

montis — Mon, 06 Aug 2018 21:19:51 +0000

In reply to Scott McClarin. Thanks for your feedback! Great info.

By: Scott McClarin

Scott McClarin — Tue, 31 Jul 2018 17:48:08 +0000

I can confirm that this AIO has a built in Dataflash storage, and I have downloaded the logs via Betaflight 3.4 from it and viewed it in Black Box Log viewer! It works great…I don’t know how many full 3min flights you can review before it ovewrites the flash memory but I have more than 40 instances of plugging in and shutting off my FC during set up and tuning (all short timeframes) along with about 4 full flights that I can review. It definitely helped me troubleshoot a bad yaw twitch on a new build with this board and BF 3.4 defaults, that had me shutting off D-term boost, while enableing Dyanic filtering and changing to 8K*8K and reducing my D Term setpoint slightly. Additionally the board shipped with the ESC’s unsynchronized, had to use BL_Heli_32 to synchronize my motors, as it twitched badly out of the package, BL_Heli Music editor also works with this board also….buyer beware, always update your ESC’s in BL_Heli 32, and then tune it in BF 3.4, 8K*8K is recommended, and Dynamic filtering will only make it slightly more buttery smooth, but if you soft mount with new motors, you may even not need it.