Weekly news & new products (2021 week 31)

        This is (irregular) weekly compilation of the new products, news and other interesting events in the RC hobby world that appeared or happened in the last week (or two).

        EdgeTX – alternative to OpenTX

        While the new firmware for OpenTX compatible radios was released almost three weeks ago, I thought it is really worth mentioning it. EdgeTX is a forked project from OpenTX firmware. While the development of the mainstream OpenTX has stagnated a bit, enthusiast developers decided not to wait forever for many long waited features that community is waiting for (OpenTX, where is the touchscreen support?). Here is what the EdgeTX devs say:

        “…In bringing you EdgeTX, our key goals for this first release were to:

        • enable use of the touchscreen interface for color radios that support it
        • allow use of high bit rate CRSF without having to modify your hardware if using transmitters like X9D+ and X7 via OneBit sampling mode

        In bringing you EdgeTX, our main goal for this first release was to give to the community a usable touchscreen interface for color radios with touchscreens. Additionally, we wanted to establish a solid foundation for future features for the most commonly used radios.”

        Link: https://github.com/EdgeTX/edgetx/releases/tag/v2.4.0

         

        FatShark Scout HD goggles

        Release of the FatShark Scout HD digital FPV goggles is probably the biggest news of the past week. These are the first FatShark DIgital FPV goggles and they are affordable starting goggles for the digital world of the FPV.

        Available @ GetFPV:?https://www.getfpv.com/fat-shark-scout-hd-fpv-goggles-w-integrated-digital-receiver.html

        Banggood:?https://www.banggood.com/Fat-Shark-Scout-HD-PVT-FPV-Goggles-…-1881764.html

         

        ImmersionRC Ghost Hybrid V2

        ImmersionRC released the second generation of the?Ghost Hybrid product. It is Ghost Receiver and Tramp VTX in one.
        The Hybrid is now available in two variants, the Uno, and the Duo.?The Uno follows in the footsteps of the original Hybrid, but with the addition of 25.5×25.5 mounting points.
        The Duo is for those who are not ready to compromise. Two full Ghost receivers, plus a 600mW Tramp 5.8GHz transmitter are mounted on a single-sided, low profile PCB.

        Available @ Pyrodrone:?https://pyrodrone.com/…/immersion-rc-tramp-ghost-hybrid-v2-uno?https://pyrodrone.com/…/immersion-rc-tramp-ghost-hybrid-v2-duo-5-8ghz-vtx-2-4ghz-rx

         

        Holybro FETtec Mini AIO 15A

        Holybro FETtec Mini AIO 15A is the first AIO FC in toothpick style with KISS firmware on board. ESC’s are capable up to?15A, supports 2-4s batteries has Graphical OSD with full KISS tuning.

        Available @ Holybro: http://www.holybro.com/product/holybro-fettec-mini-aio-15a

        Banggood:?https://www.banggood.com/25_5x25_5mm-Holybro-FETtec-Mini-AIO-2-4S-F3-Flight-Controller-…-1881675.html

        Features
        FC:

        • KISS FC firmware
        • F3 Processor (STM32F303CCT6 @ 72MHz (MPU6000))
        • Supply voltage 6-18V (2S-4S Lipo voltage)
        • Dedicated onboard 5V BEC (max 1A)

        ESC:

        • Active current limiting @ 15A
        • Input voltage: 2S-4S
        • High quality 30V MOSFETs
        • STM32G071 @ 64MHz
        • 128 kHz Motor PWM
        • Automatic input signal detection
          • Dshot 300-2400
          • PWM
          • OneShot42/125

        OSD:

        • Graphic OSD (STM32)
        • Full KISS Tuning
          • Filter (PIDs, Rates, Settings)
          • LED control (RGB LED, Racewire)
          • VTX
          • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
          • KISS GPS support + live map
          • Custom graphic pilot logo
          • Stick overlay
          • Custom layout

        The FETtec Mini AIO 15A works with KISS/FETtec FC firmware version 1.3RC45Y or later !

        Dimensions
        Size: 29 x 29 mm
        Mounting: 25,5 x 25,5 mm
        Weight: 3.6 g

         

        Dalprop?Cyclone T3028

        Dalprop now has 3 inch props with T-mount. Cyclone T3018 and T3028 3-bladed propellers.

        Available @ Foxeer:?https://www.foxeer.com/search?keywords=Dalprop+New+Cyclone

        Aliexpress:?https://s.click.aliexpress.com/e/_97e27M

        Leave a Reply

        Your email address will not be published.

        *

        主站蜘蛛池模板: 南宫市| 清新县| 商都县| 若尔盖县| 嘉定区| 太仆寺旗| 元江| 宕昌县| 永德县| 敖汉旗| 东明县| 潮州市| 平定县| 故城县| 龙海市| 扶风县| 伊吾县| 中西区| 澜沧| 翁牛特旗| 涞源县| 迁西县| 阆中市| 益阳市| 济阳县| 新密市| 南涧| 绥阳县| 上高县| 安泽县| 元阳县| 鹰潭市| 中卫市| 宁远县| 景东| 突泉县| 固始县| 乡城县| 庆城县| 乌兰浩特市| 满洲里市|