青青草国产一区二区三区,欧美国产精品一区二区,国产精品超碰

By: Dan.

Dan. — Mon, 05 Jul 2021 12:15:29 +0000

I have alot of problems wiht this board PNP version, the vtx cuts out ore getting bad video wobling wehn flying very bright areas

By: Yrn

Yrn — Fri, 26 Mar 2021 09:37:40 +0000

Did anyone get the Betaflight TX lua scripts working with this board? I have a Radiomaster TX16s and receive telemetry from the board. The Betaflight scripts also get past the ‘initialising’ phase, but all value afterwards show ‘—‘ and I cannot change them. Any ideas?

By: OJW

OJW — Sat, 20 Feb 2021 15:07:11 +0000

In reply to Edgar Reyes.

Target for all 3 of mine is betafpvf411rx (no receiver version).

Flashed btfl 4.2.8. 65mm/18000kv. RPM filtering with JESC 2.3 working.

Added 16v/100uf capacitor.

Video does not cut out at all. Voltage over OSD and Frsky fport telemetry reading fine.

No major problems but I did assume current sensor even though it’s not advertised lol.

By: Edgar Reyes

Edgar Reyes — Sat, 20 Feb 2021 00:57:32 +0000

In reply to Cam.

I had that problem too, are you flashing the “MATEKF411RX”? This board seems really good as long as you keep it stock and just drop your tune.
I’m having a lot of problems with it.

By: Cam

Cam — Wed, 17 Feb 2021 03:07:10 +0000

has anyone had a problem with the video cutting out on betaflight or the voltage not reading in emuflight?

By: montis

montis — Mon, 15 Feb 2021 22:09:30 +0000

In reply to Adrian Garsia. I guess you have Betaflight 3.7 preinstalled on this board thats why CLI command does not work. Try binding in D8 mode.

By: montis

montis — Mon, 15 Feb 2021 21:59:37 +0000

In reply to Carlos. Hi, you should have bought no rx version if you wanted to use external rx. It is doable with your board also, bur it's tricky. There is small 6pin header on the board. Two pins are RX2/TX2. If you could manage to tap the wires to these pins, then you could connect the external rx.

By: Carlos

Carlos — Mon, 15 Feb 2021 18:33:35 +0000

Hi, thanks for the review. I’ve got the F4 1S AIO FC(SPI Rx). Is it possible to use an external receiver with it? Like a Crossfire nano? not obvious from the pics how to connect it though. Thanks

By: Adrian Garsia

Adrian Garsia — Wed, 10 Feb 2021 22:44:22 +0000

I just got this F4 1s A10 flight controller with plug in fr sky receiver. The bind button does not seem to work. (Green Led keeps flashing). In Betaflight configurator the receiver tab does not have the bind button and when I type “bind_rx” it says that the command is not supported. I tried pushing the bind button and then connecting the battery but this did allow me to connect my radiomaster t16s either.

I am not sure what to try next. Can anybody suggest a solution? Thanks

By: montis

montis — Fri, 15 Jan 2021 16:27:12 +0000

In reply to Edgar Reyes. You can find the 16.8 revision BLHEli_M firmware here: https://github.com/JazzMaverick/BLHeli/tree/JazzMaverick-patch-1/BLHeli_S%20SiLabs/Hex_files_16.8 You can also use BLHeli_M configurator for uploading the BLHeli_M firmware here: https://github.com/Asizon/blheli-configurator/releases/