RunCam Thumb Pro is capable of recording video with 4K@30FPS / 2.7K@60FPS / 1080P@120FPS resolutions.

RunCam Thumb Pro has the mobile app for accessing the camera settings, video recordings and live preview or replay of them. Settings can be applied by scanning the QR code generated by mobile app.

RunCam Thumb Pro camera is bigger and weights more than RunCam Thumb. Size is 55x26x21mm vs 52x13x19mm, weight is 16g vs 9.8g.

RunCam Thumb Pro has remote camera control via UART port.

RunCam Thumb Pro mobile app settings:

Release date is 20th Jul 2022

Available @

RunCam: https://shop.runcam.com/runcam-thumb-pro/

Banggood (10% off coupon “BG6d8415“): https://www.banggood.com/RunCam-Thumb-Pro-4K-…p-1963501.html

Makerfire: https://shop.makerfire.com/products/runcam-thumb-pro-4k-camera-16g

Specifications

• Item Name: Rumcan Thumb
• Resolution: 1080P@60FPS
• Video Format: MP4
• Gyro: Built-in
• Communication Interface: Micro USB
• Support Micro SD Card Capacity: 128G Max
• USB Power Input/Terminal Power Supply: 5.0V
• Dimension: 52mmx13mmx21mm
• Net Weight: 9.8g

Features:

• Built-in Gyro
• Mini Size and lightWeight
• Detachable Lens Protection Cover
• Adjustable Angle Bracket
• 150° FOV
• DC 5V Power Supply
• 1080P 60FPS

Closer look

The package contents: RunCam Thumb camera, lens protection cap, ND filter cap, power cable, camera mount with screws and double sided sticky rubber pad.

The weight of the RunCam Thumb is only 9.9 g.

The weight of the supplied camera mount is 2.7 g.

The total weight of the camera, ND filter and the power supply cable is 10.3 grams.

SD Card

The microSD card must be installed in the slot which can be accessed by removing the back cover. The recommended microSD card speed rating should be 10MB/s or faster (Speed Class 10, UHS Speed Class U1, Video Speed Class V10 or better). Refer to the chart below for SD card selection.

There is no detent or any other support for correctly inserted card, you just need to push the card until it stops, look at the example below.

The microSD card cover is somehow loose and can come off right in the middle of the flight. It is recommended to fix it with piece of tape.

Settings file

All camera settings can be accessed and changed by altering the configuration file [thumb.conf] located on the SD card.

RunCam Thumb configuration file [thumb.conf] default settings are below:

; Note: Inner product info, DO NOT EDIT!
[ProductInfoDoNotEdit]
FwVer=2.1.0

; Video settings
[Video]
; Resolution.
; Available values: [0]:1080p60fps; [1]:1080p50fps; [2]:1080p30fps;
; Default value: [0]
videoResolution=0

; Gcsv file:Please use a high-speed card above 64G and configure the video resolution to 1080p@50fps;
; Available values: [0]:OFF; [1]:ON;
; Default value: [0];
GCsv=0

; Loop recording interval.
; Available values: [0]:OFF; [1]:1 minute; [2]:3 minutes; [3]:5 minutes.
; Default value: [0]
LoopRecordingInterval=0

; Auto recording switch. –
; Available values: [0]:OFF; [1]:ON.
; Default value: [0]
AutoRecording=0

; General settings
; Note: Brightness and exposure control settings are usually set to only one or the other.
[General]
; Exposure .
; Available values: [0:Lower]<—->[6:default]<—->[12:Higher]
; Default value: [6]
Exposure=6

; Brightness.
; Available values: [0:Lower]<—->[5:default]<—->[10:Higher]
; Default value: [5]
Brightness=5

; Sharpness.
; Available values: [1]:Lower, [2]:Low, [3]:default, [4]:High, [5]:Higher
; Default value: [3]
Sharpness=3

; Contrast.
; Available values: [1]:Lower, [2]:Low, [3]:default, [4]:High, [5]:Higher
; Default value: [3]
Contrast=3

; Saturation.
; Available values: [1]:Lower, [2]:Low, [3]:default, [4]:High, [5]:Higher
; Default value: [3]
Saturation=3

; White balance.
; Available values: [1]:Auto, [2]:Daylight, [3]:Cloudy, [4]:Tungsten
; Default value: [1]
WhiteBalance=1

; Power saving mode. [0]:OFF; [1]:1 minute; [3]:3 minutes – automatically turns off the camera if not recording for 1 or 3 minutes.
; Available values: [0,1,3]
; Default value: [0]
PowerSavingMode=0

My recommended best RunCam Thumb settings are:

Exposure=5, Brightness=4, Sharpness=4, Contrast=3, Saturation=5 and White balance=1.

GyroFlow stabilization

RunCam Thumb has built in gyro and can record gyro data alongside the video recordings. The gyro data is stored in the separate files with *.gcsv extension. You can stabilize the video footage with GyroFlow software.

Download Gyroflow from here: https://github.com/gyroflow/gyroflow/releases

Open (or gust drag and drop) video file and gyro motion data file into the GyroFlow software.

Select the RunCam Thumb lens profile for barrel distortion correction.

Press “Auto sync”

Hit the “Export” button and GyroFlow will render the stabilized video file.

Below is an example of raw video file recorded by RunCam Thumb and stabilized with GyroFlow.

RunCam Thumb can be purchased from:

Banggood: https://www.banggood.com/RunCam-Thumb-Ultra-light-HD-Camera-…-1932248.html

Disclaimer: This item was supplied by Banggood for a fair and unbiased review. Banggood never asked for a positive review and never influenced my opinion in any way. I’m trying my best to stay uninfluenced and give only my own opinion. All affiliate links if there are any help me purchase items for future reviews and tests.

Inside the Firefly X Lite camera there are the same electronics as in the full sized Firefly X camera –? SONY IMX377 12 Mega WDR CMOS sensor with Ambarella H22S85 chipset. So the recordings quality should be similar to the?Firefly X camera. You can find a lot of examples on the YouTube.

Camera is capable of recording in 4K resolution in 60 frames per second. It also records in 2.7K/60fps, 2.5K/60fps and

Firefly X Lite camera comes with a standard GoPro style mount.

Camera can be powered on by supplied battery to USB-C type adapter or by separate 5V cable.

1. POWER BOTTON；
2. Type CUSB port；
3. Video indicator (flash when recording)；
4. record button；
5. WiFi indicator (light on when WiFi is on);
6. Lens；
7. 2p power port (5V IN)；
8. Cooling hole；
9. Microphone hole；
10. TF card slot；

Key Features：

• 4K 60FPS
• Only 34g weight
• Ambarella H22S85 chipset
• Gyro 4.0 Image Stabilization
• WiFi + BT4.1 Remote control
• SONY IMX377 12 Mega WDR CMOS

Button functions:

Operating instructions:

Use the 5V power supply on the drone to supply power to the camera, and then press the power button to turn on the camera, and the buzzer will ring three times quickly. When the camera is turned on, the default resolution of the camera is 4k 60 frames. If you want to switch the resolution, you can press and hold the Record Button for 3 seconds to switch. The switching?array??is: 4k 60 frame (two beeps of the buzzer) / 2.7k 60 frame ultra wide angle (three beeps of the buzzer) / 2.5k 60 frame on anti shake (four beeps of the buzzer). If the camera needs to flip 180 degrees to install, press the power button for 3 seconds after the camera is turned on, the camera will turn on the image flip function. After the camera is turned on, press the power button briefly to turn on the WiFi function, and then use the mobile phone to connect with the FIREFLY app. You can set camera time and parameters, preview and download videos.

Hawkeye Firefly X Lite Firmware update

Hawkeye Firefly X Lite?Firmware V2.0 update.

Hawkeye Firefly X Lite Firmware V2.0 upgrade instructions
https://cdn.shopify.com/s/files/1/30…tions_V2.0.pdf

Hawkeye Firefly X Lite Firmware V2.0 Download:
https://www.jianguoyun.com/p/DeLIOtUQ4rDjBxidmpQE

The updated functions in Firmware V2.0 (2021-10-12):
1， WDR enhancement function is added and opened by default;
The whole image quality has been greatly improved!
2， The synchronous output of gyro data in CSV format is added,
which can be used for computer post stabilization processing;
3， The resolution of 2.7k60/30fps 4:3 and 1920 * 1440p60/30fps
4:3 are added.
4， The four resolutions switched by pressing the key are 2.5k60fps
EIS on; 1440P 4:3; 4K30FPS Ultra; 2.7K30FPS 4:3; The last three sets
of resolutions will automatically output gyroscope data;
5， Put the Lite_ config file in the root directory
of the card to facilitate setting camera parameters with the TF card
6， If the card is inserted and there is no video recording, it will
beep twice every 6 seconds to prompt the user to start the video
recording before taking off!
7， Add the function of USB port external parameter adjustment AV
board; Subsequently, firefly cam will launch a parameter
adjustment AV board, which can connect FPV glasses for intuitive
viewfinder and parameter adjustment.
8， By default, the dual file function is enabled. When recording,
two videos with the same content will be generated, A and B. the B
video file is very small, which is used to watch on the Firefly app to
increase the video playback fluency.

Hawkeye Firefly X Lite Firmware V3.0 update

Hawkeye Firefly X Lite Firmware V3.0 Download:

https://www.jianguoyun.com/p/DYUZ1IEQ4rDjBxj5ipgE

Available @

Makerfire:?https://bit.ly/Makerfire-Firefly-X-Lite-4K-Camera
XT-Xinte:?https://bit.ly/XT-Xinte-Firefly-X-Lite-4K-Camera
Aliexpress:?https://bit.ly/Aliexpress-Firefly-X-Lite-4K-Camera

Specifications:
Resolution: 4K 60 fps;?2.7K 60 fps;?2.5K 60fps;?2.7k60/30fps with 4:3 and 1920*1440p60/30fps?4:3 (Default 4k60FPS, can be switched )
Lens Diameter: 17.5MM (Compatible with GoPro ND filters)
Image flipping function: Yes
RC and AV OUT: YES
Kind of MicroSD card supported: U3(Note: Low speed sd card will cause unstable)
Maximum size of MicroSD card supported: 512G
Camera size: 61×38×26 MM
Weight: 34g
Compressed format: H.264
Video format : MP4
Diaphragm: F=2.8,7G1IR LENS
Angle: Diagonal 150 degrees
Working Voltage: 5V
Power supply: 1A
WiFi distance: 10M
Waterproof: No
Six axis Gyro video stabilization: Yes

DJI Action 2 camera will have new 1/1.7 sensor, 155 degree FOV, better low-light performance, RockSteady Digital Video Stabilization V2.0, bigger battery life plus external battery module, improved/upscaled built-in audio quality. Camera supports resolutions up to 4K / 60fps with the aspect ratio of 4:3.

Camera dimensions 39x39x22.3mm and weight is 56 grams.

DJI Action 2 camera will have attachable LCD display with extended battery. Extended battery allows to record up to 195min.

Possible photo of the new camera.

DJI Action 2 specifications:

Source: Twitter

You want more? Ok … this is from the #DJI #Action2 manual. Including the #specs list. Field of view is now 155 degrees in stead of 145. Comes with a necklace too. #thebigleak@DroneXL1 @geeksvana @dronedj @techdronemedia @DronewatchNL @DronefriendlyB @dronemodelismo @OsitaLV pic.twitter.com/SxSRm4VMhx

— Jasper Ellens – 27 Leaks (@JasperEllens) September 23, 2021

Caddx Peanut camera comes with charging adapter and three kinds of power supply cables – you can power it even from 6S battery with the special power supply cable.

Peanut has the remote control ability. Below it the remote control configuration details.

Release date: 2021-09.23

GetFPV:?https://www.getfpv.com/caddx-peanut-fpv-action-camera.html

MakerFire:?https://shop.makerfire.com/collections/new-arrival/products/caddx-peanut-fpv-action-camera

Banggood:?https://www.banggood.com/Caddx-Peanut-Action-Camera-Wifi-2_5k-30min-Recording-27g-Magnetic-Charging-FPV-Sport-Camera-for-RC-Drone-p-1897239.html

Specifications:
Lens aperture: F/2.2
ISO: Auto, 100-3200
35mm equivalent focal length: 11.24mm
EV: ±4EV

Video resolution:
2560×1440@50fps,30fps,25fps,24fps
1920×1080@50fps,30fps,25fps,24fps.

Video mode:
Pro Video (Flow State stabilization )，
Video (Basics stabilization), HDR, Timelapse，
TimeShift (Hyperlapse), Slow Motion

Storage: 32GB(~28GB usable)
Video format: Mp4
Video code: H.264

Video maximum bitrate: 80Mbps
USB: Type -C
Charging Method:
Power connector
USB connector
Charging Time: 23mins-80%/35mins-100%
Bluetooth: BLE5.0
Wi-Fi: 5G(standard range approx .10m)
Operating environment: -20℃~40C

Weight: 27g
Dimensions:52mmx24mmx21mm
Power supply range: 5V@1A (Or use 2S-6S step-down module )

OpenTX version 2.3.14 release

OpenTX version 2.3.14 was released. You should update to this version if you don’t want?Real Time Clock battery?to drain prematurely. Here are the release notes:
ALL RADIO
fix excessive RTC battery drain (Bug affecting all radio model, introduced in 2.3.0, thx MikeB for spotting this)
ACCESS RADIO
fix possible jerky servo movement
X9D + 2019 RADIO
fix trainer mode change potentially triggering emergency mode
fix trainer jack detection
MISCELLANEOUS
fix AFHSD3 option not available on some radio (x7 / x9d +)
fix AFHSD3 broken on colorlcd radio since 2.3.12
COMPANION
fix curve tip window showing blank
fix Companion Mac OS X not running on some version of Mac OS X
fix negative sign missing for telemetry source formula

ExpressLRS version 1.0.0 release

ExpressLRS released… first version ever! Actually not the first but the software is so mature, that it came out of the Release Candidate state to normal version 1.0.0. The maintenance update 1.0.1 followed shortly. ExpressLRS Configurator was also updated and now it supports updating via WiFi directly from the configurator.

Read more about the ExpressLRS in this guide:?ExpressLRS – Open Source Long Range radio control system – Complete Guide

Happymodel OVX300 OVX303 5 VTX Open Source Video Transmitter

Happymodel in collaboration with ExpressLRS devs ha released the first Open Source VTX – OVX300 and OVX303. These two VTXs use Open Source firmware, written by ExpressLRS devs.??OVX300?and?OVX303 are working with the both VTX control protocols – SmartAudio and IRC Tramp. It automatically detects the working protocol and works without any headaches.

Read more about??SmartAudio?in this guide:?Guide: SmartAudio VTX control and how to set it up

Happymodel OVX300 and OVX303 VTX are designed with the ability to have its firmware updated via Betaflight Passthrough.

Available @:

Makerfire: https://shop.makerfire.com/products/happymodel-ovx300-ovx303-5-8g-40ch-300mw-vtx-open-video-transmitter

XT-Xinte:?https://www.xt-xinte.com/Happymodel-OVX300-OVX303-5-8G-40ch-300mw-VTX-OpenVTX-p936004.html

BetaFPV X-Knight 35 quadcopter

BetaFPV X-Knight 35 is the newest release from BetaFPV. It is Ready to Fly freestyle quadcopter with the new 3.5 inch prop size category. It has digital FPV system with?Caddx Polar Vista Kit containing freshly released Caddx Polar digital FPV camera.

Available @

BetaFPV:?https://betafpv.com/collections/x-knight-series/products/x-knight-35-fpv-quadcopter

Specifications:
Item: X-Knight 35 FPV Quadcopter
Weight: 142.9g (Without battery)
Motor: 1404 3800KV Brushless Motors
Power Connection: XT30?
Props: HQ 3520 3-Blade Propellers (Gray) / Gemfan 3520 3-Blade Propellers (Gray)
FC&ESC: F4 AIO 20A Brushless Flight Controller V3
Battery: 750mAh 4S 95C Lipo Battery
VTX&Camera: Caddx Polar Vista Kit (VTX)
FPV Camera Degree: 0°-60°
Diameter: 155m
Receiver: ELRS 2.4GHz Receiver / TBS Receiver
Flight time: 11~13 min smooth flight or 4~6 min flight of FPV freestyle tricks with 4S 750mAh battery

BetaFPV HX115 LR Toothpick quadcopter

BetaFPV also released HX115 LR 1S quadcopter, so called “flying battery”. It has removable battery holder for 18650 type Lion battery and the option to use regular LiPo 1S batteries as well. The BNF HX115 LR quadcopter comes with?12A 1S FC with ExpressLRS RX on board.

Available @

BetaFPV:?https://betafpv.com/collections/expresslrs-series/products/hx115-lr-toothpick-drone

Specifications:
Item: HX115 LR Toothpick Drone
Wheelbase：126mm
Weight：44g
Motor：1102-18000KV
Charge connector：BT2.0 connector
Propeller：HQ 3020 2-Blade Propellers 1.5mm Shaft
Flight controller: F4 1S 12A AIO FC with ELRS 2.4G Receiver
Battery：BT2.0 450mAh 1S Battery
VTX: M02 25-350mW 5.8G VTX
Camera：Caddx ANT camera
Camera Tilt Degree：0-60°
Receiver：Built-in ExpressLRS 2.4G Receiver
Flight time：3-5min with BT2.0 450mAh 1S Battery / 15min+ with Sony VCT6 3000mAh battery

BetaFPV?F4 1S 12A AIO Flight Controller

New 1S AIO toothpick board from BetaFPV. This time it supports up to 12A power output and has two options of integrated SPI receivers – ExpressLRS and FrSky receivers. This is the first toothpick board with integrated ExpressLRS receiver.

This FC is used in?BetaFPV HX115 LR Toothpick quadcopter.

Available @

BetaFPV:?https://betafpv.com/products/f4-1s-12a-flight-controller

XT-Xinte:?https://www.xt-xinte.com/BETAFPV-F4-1S-12A-AIO-Brushless-Flight-Controller-with-ExpressLRS-Receiver-…-p936857.html

Specifications
Item:?F4?1S?12A?AIO?FC (Frsky)
CPU:?STM32F411CEU6?(100MHZ?)
Gyro:?MPU6000?(SPI?connection)
Firmware?version:?betaflight_4.2.0_STM32F411
OSD:?Built-in?BetaFlight?OSD?(STM32?controls?OSD?chip?over?SPI?in?DMA?mode)
Receiver:?Integrated?SPI ELRS Receiver / SPI Frsky?Receiver
Motor?Pin?Connecter:?1.25mm?Header?Pins
Mounting?Hole?Size:?26mm?x?26mm (suitable?for?whoop?pattern?mounting?hole)
Weight:?4.74 g?(without?power?cable?and?BT2.0?connector)
USB?Port:?Type-C

So as far as we know, RunCam has no license to produce the digital FPV cameras for DJI FPV system, but as long as DJI uses standard MIPI interface, RunCam MIPI camera should work.?

RunCam?has finally obtained the license for producing the products compatible with?DJI Digital FPV system. RunCam has even Air unit, called RunCam Link. See the full list of the RunCam digital products here:?https://shop.runcam.com/digital-fpv-system-categorie/

By default RunCam MIPI camera comes with the?firmware for Digital (DJI) VTX capable of outputting the?1280*720@60fps with a low 32ms latency. This camera can also be used with?special firmware for IoT appliances or?Raspberry Pi?with a OpenHD system (you should send email at run@runcam.com for the firmware).?RunCam MIPI is compatible with any digital HD system that provides standard MIPI interface.

It turns out that RunCam revised the specifications and changed their mind – RunCam MIPI camera does not work with OpenHD, HDZero or other HD systems except the DJI Digital System.?RunCam MIPI FPV camera is also not compatible with FatShark Shark Byte system.

RunCam MIPI camera has 1.8mm lens with?160°?diagonal field of and 16:9 aspect ratio only.

Sample footage from RunCam MIPI camera:

RunCam answer on the MIPI camera compatibility with the DJI Air and Caddx Vista systems:

Available for preorder:

@ RunCam: https://shop.runcam.com/runcam-mipi/

Expected release date:?15th Jun 2021

Specifications:
Designed for HD digital systems (DJI Air/Caddx Vista)
2MP CMOS Sensor
Micro size with 6G High Quality Lens
1280*720@60fps (Default) or 1920*1080@60fps?(Custom) video formats
Changeable 1.8mm lens with D:160° H:133° V:75° field of view
4 lane MIPI CSI interface and 26 Position 0.30mm Pitch plug
450mA@3.3V input voltage
Size: 19*19*17mm
Weight of 6.5 grams.

This camera is the first 10mmx10mm sized camera and this size category probably should be called atom size. This camera is targeted for whoop and small toothpick categories. Now we need the new camera mounting options for this new ultra small size fpv camera.

Specifications:

Model: RunCam Atom
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens: FOV 130° (M8)
Signal System: NTSC
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power: DC 5-17V
Current: 130mA@5V, 40mA@17V
Housing Material: ABS
Net Weight: 1.7g
Dimensions: L10mm*W10mm*H12.5mm

Available @

RunCam: https://shop.runcam.com/runcam-atom/

Caddx Air Unit Micro in fact is the same DJI Air Unit, just the camera in this combo is changed to Caddx Nebula. 

The Caddx Air Unit VTX module is just the same as DJI Air Unit module, the dimensions are the same the electronics are the same as so specifications just match.

Specifications:

Weight
Air Unit (Camera included): 41.6 g
Antenna: 3.9 g (MMCX elbow each)

Dimensions
Air Unit: 44 × 37.8 × 14.4 mm
Camera: 20.7×19×19mm   (DJI Camera was: 27.4 × 21.1 × 20.1 mm)
Coaxial Cable: 100 mm

Operating Frequency: 5.725-5.850 GHz
Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm

Min. Latency (end-to-end)
Low Latency Mode (720p/120fps): <28 ms
High-Quality Mode (720p/60fps): <40 ms

Max transmission Distance
FCC.SRRC: 4km
CE (EU): 0.7km

Video Format: MP4(Video H.264, Audio: AAC-LC)
I/O Interface: USB-C, MMCX, 3-in-1port, microSD card slot
Supported Flight: BetaFlight Control System
Operating Temperature Range: 0° to 40°C(32° to 104°F)
Input Power: 7.4-17.6V

Camera
Sensor:1/3.2”CMOS；
Effective Pixels:4M
Lens: 2.1mm,f/2.1
Shutter:Rolling shutter
ISO:100-25600
FOV: 150°(D);122°(H);93°(V)

Available @

Makerfire (coupon MKFCaddx8 save 8% OFF): https://shop.makerfire.com/collections/new-arrival/products/caddx-air-unit-hd-digital-video-transmittion

Banggood: https://www.banggood.com/Caddx-Air-Unit-HD-Digital-Video-Transmission-Micro-Version-…-1841857.html

GetFPV: https://www.getfpv.com/caddx-air-unit-micro-version-for-dji-digital-hd-fpv-system.html

RunCam Racer 5

The newest Racer 5 is fully analog FPV camera as opposite to the Racer 4 that was digital/analog and made a stir in the community as Caddx accused in the copying their digital FPV camera technology. 

RunCam Racer 5 has the 1000TVL CMOS sensor and is available in two lens options:  1.8mm lens with 160° FOV or 2.1mm with 145° FOV. 

RunCam Racer 5 is the first camera that has gyro built in. FPV pilots now can easily set the camera angle by looking at the angle value in the OSD.  

Available @

Banggood: https://www.banggood.com/Runcam-Racer-5-1000TVL-…-FPV-Camera-for-FPV-Racing-RC-Drone-p-1787265.html

Makerfire: https://shop.makerfire.com/collections/new-arrival/products/runcam-racer-5-camera

RunCam Racer 5 User Manual: https://www.runcam.com/download/Racer5/Racer5-Manual-OSD.pdf

Model: RunCam Racer 5
Image Sensor: Super WDR CMOS Sensor
Horizontal Resolution: 1000TVL
Lens: 1.8mm FOV 160° / 2.1mm FOV 145°
Screen Format: 4:3 / Widescreen Switchable
Signal System: NTSC / PAL Switchable
Mirror/Flip: Available
Integrated OSD: Yes
Built-in gyro: Yes
One Touch Scene Setting: Personal / Lightrax
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Min. Illumination: 0.01Lux@1.2F
WDR: Super WDR
Day/Night: Color
Menu Control: Cable Control / Remote Control
Power: DC 5-36V
Current: 110mA@5V / 40mA@12V
Housing Material: ABS
Net Weight: 6.1g
Dimensions: L19mm*W19mm*H21mm

Foxeer Falkor 3

Foxeer has released the third generation of the Falkor camera. Falkor 3 has a little bit improved latency (6ms) over the older Flakor 2 and the low light performance was improved also. Falkor 3 has 0.0001 Lux min illumination versus 0.001 Lux on the older Falkor 2. New Falkor has bigger M12 1.7mm lens versus the M8 1.8mm lens on the older Falkors.

Available @

Surveilzone: http://www.surveilzone.com/Foxeer-Falkor-3-Micro-6ms-Latency-00001Lux-WDR-FPV-Camera-g-2371

Foxeer: https://www.foxeer.com/foxeer-falkor-3-micro-6ms-latency-starlight-wdr-fpv-camera-g-313

Falkor 3 User Manual: https://download.foxeer.com/Foxeer_FALKOR_3_Manual.pdf

Sensor Type: Sony 1/3″ CMOS Sensor
Scale: 4:3(Default)/16:9 Switchable
Tv System: PAL(Default)/NTSC Switchable
Resolution: 1200TVL
Lens:M12 1.7mm
FOV: 4:3 FOV-H: 138° FOV-D: 172°
16:9 FOV-H: 138° FOV-D: 158°
Shutter Speed: PAL 1/25~1/10000 sec; NTSC 1/30~1/10000 sec
Video Output: CVBS Analog Signal
Minimum Illumination: 0.0001Lux
White Balance: Auto
DNR: 3DNR
WDR: 100dB
DAY/NIGHT EXT/Auto/Color/B&W
Flight OSD Voltage/Cam Title/Time
Input Voltage 4.6V~20V
Language ENGLISH /中文/ PYCCKNN / ESPANOL / ITALIANO /FRANCAIS/POLSKIM/ PORTUGUES / 日本語 / EAAHNIKA
Working Temperature -10°~50°C RH90% MAX
Working Humidity 20~80%
Storage Temperature -20°~70°C
Consumption 95mA±15% @ DC12V
Dimension: 19*19
Weight: 8.8g(Exclude cable)

Caddx Ratel 2

Caddx has upgraded its best Ratel FPV camera. The Ratel 2 has the same 1/1.8″ sensor, but the Caddx has upgraded the firmware ad the colors now look more natural and vibrant.

New Caddx Ratel 2 has the same lens as on the DJI Air Unit camera. This lens has wider 165° field of view and has no annoying lens glare. 

Caddx Ratel 2 now has metal case and is lighter. The weight is 5.9 grams.

Available @

Banggood: https://www.banggood.com/Caddx-Ratel-…-FPV-Camera-For-RC-Drone-p-1779714.html

Makerfire: https://shop.makerfire.com/collections/new-arrival/products/caddx-ratel-fpv-camera

Caddx Ratel 2 User Manual: 

Specifications:
Name: Caddx Ratel 2
Sensor: 1/1.8′‘ Inch Starlight 
Resolution: 1200TVL
FOV: 165°
Lens: 2.1mm
TV System: NTSC & PAL (switchable)
Image: 4:3 & 16:9 (switchable)
WDR: Super WDR
DNR: 3DNR
Min. Illumination: 0.0001LUX
Video Output: CVBS
Day/Night: Auto/Color/B&W/EXT
Shutter Speed: PAL:1/50~100,000; NTSC: 1/60~100,000
Wide Power Input: 5-40V
Working Temperature: -20℃ ~ +60 ℃
Weight: 5.9g
Dimension: 19*19*20mm